Jangro Kettle Shower Descaler 500ml

A fast acting kitchen descaler

Jangro Kettle & Shower Descaler is for use with kettles, irons, shower heads and coffee machines.

Pack size: 500ml, pH: 2.4, Dilution: varies for each appliance, see notes below.

How to descale irons, kettles and shower heads

KETTLES:

1. Fill kettle two thirds with warm water.
2. Add 150ml of descaler. Leave for 4 hours or until fixing stops, then empty kettle.
3. Refill with clean water, boil and flush out again before use. Repeat process if scale persists.

COFFEE MACHINES:

1. Pour 150ml of descaler into the reservoir. Add 600ml cold water.
2. Switch machine on for 1 minute. Switch machine off and leave for 60 minutes.
3. Boil through remainder of descaler solution. Boil twice and clean water.

STEAM IRONS:

1. Always unplug iron and allow to cool. Refer to manufacturers cleaning instructions before descaling.
2. Add 50ml of descaler to water container of hand warm iron. Top up water container with warm water and set control to steam position.
3. Gently shake iron over sink until solution starts to drain through the steam holes, allowing to drain for 30 minutes.
4. Rinse thoroughly with cold water and dry.

SHOWER HEADS:

1. Add 50ml of descaler to 300ml of warm water in a plastic container.
2. Immerse shower head in solution until scale is removed.
3. Rinse out container and shower head thoroughly.